中文版   |   English
  产品分类 Products List
  机箱
  机柜
  机床防护罩
  配电柜
  喷塑加工
  联系我们 Contact us
  地 址:宁波市奉化西坞镇东畈路12号
电 话:0574-8850 4672
传 真:0574-8850 4673
邮 箱:sales@xadqpj.com
网 址:www.xadqpj.com
  行业资讯   News 首 页 > 行业资讯


Chassis machine uses compressed air cooling process
时间:2015/6/30    浏览次数:1113
 
Summer is the hottest year in a season that temperatures are generally high, not only people and animals need the help of outside forces cooling, electrical products is also true.
 An electrical chassis cabinets, which itself exudes a lot of heat coupled with the effects of weather the heat more. That being the case, then it is cool if we deal with it? If the local overheating of the chassis machine can install cooling unit, increasing the wind velocity and flow; can also be installed in the cabinet refrigeration equipment; also can be cooled by increasing chassis cabinets Holdings cold air into the wind.
 Currently, most of the chassis cabinets are used to cool the compressed air process. Its principle is actually compressed air flowing through the vortex tube becomes cold, heat two streams, the hot air through the vortex tube exhaust discharge to a slightly higher pressure, air flow introduced into the heating portion of the chassis through the shunt, reduce and stabilize the temperature inside the chassis, and the outside air does not enter the enclosure. Low-cost, reliable vortex tube cooler as the core components, cubicle cooler air temperature can be lowered to 45 degrees. At the same time a positive pressure air flow through the shunt in the cabinet to import screen cabinet heating parts, so that the outside air can not enter, DC panel cabinet for efficient cooling and purification




[关闭]


宁波机柜   |   宁波机箱   |   机床防护罩衣   |   配电柜   |   宁波钣金加工   |   宁波钣金件

Copyright(c) 宁波轩昂电器配件有限公司 版权所有    地址:宁波市奉化西坞镇东畈路12号    电话:0574-8850 4672    传真:0574-8850 4673 技术支持:宁波玖源网络

  
关键字:钣金机箱|机柜|宁波钣金加工|宁波控制箱|宁波喷塑加工|宁波钣金件
友情链接:名站在线|爱链网|中国塑料机械网|奉化水蜜桃